PA-EX - Connect-EZ

The PA-EX Connection

The patented Connect-EZ® PA-EX is a low-profile concrete panel-to-foundation connection device that exceeds ACI 318-14, 16.2.4.3(b) code requirements to resist 10,000-pound tension loads. Tested to 18,000 lbs; a Safety Factor of 1.8.

The PA-EX is fully galvanized for exterior panel installation. This device is frequently installed with a threaded rod and epoxy and can be used in high seismic zones. Just four inches of the device is exposed above the bottom of the concrete panel and is easily concealed with pavement or landscaping. As with all Connect-EZ® products, the PA-EX requires no field welding.

PA-EX Features

Simple installation
No field welding
No special installation skills required
Installs in minutes
Provides a clean finished appearance
Quick, positive visual inspections
Fully Galvanized for exterior application, no patching required
Tested to 1.8 times (18,000 lbs) code required 10,000 lbs tensile capacity
Provided with the threaded rod (but not the epoxy)

Safety Assured

During recent full-scale testing, the PA-EX exceeded the code-required tensile load of 10,000 lbs by a factor of 1.8!
Reduced eccentricity – load transfer path closer to the neutral axis of the panel
Panel anchor clamping forces engage the considerable panel-grout-foundation friction force resistance to in-plane and out-of-plane shear loads.

Gallery

Resources

Structural Calculations

ADVISORIES

NOTE: While a threaded rod and epoxy are frequently specified, the means of fastening the PA-EX to the foundation is left to the professional judgement of the Engineer of Record.

CAUTION: To prevent obstructions when drilling concrete anchors, avoid placement of top resteel in panel foundation area directly beneath panel.